[Daveincave67]

I’m having problem with changing from D to R or at all while the transmission is under resistance, for instance standing still in a hill, or on uneven ground.
I have to use force to change gear, or try to get the driveline free from load before changing gear.
It almost feels like i’m bending the gearstick.
When the driveline is without resistance it works properly.
The quad has to roll freely the last meter or so without any throttle to even make it possible to switch gear.
Does anyone else experienced the same?

Mine is 2023 and I have had this issue since the first snow fall

 

[Daveincave67]

I disagree, Since the gear arrangement is park-reverse-neutral-high-low and the gear gets stuck in low so it does not go into neutral what you suggest as a solution does not work. without moving the machine I can go from park to low and the lever will not disengage easily

The easiest way is to turn it off then the shifter moves easily. NOT THE WAY A NEW BIKE SHOULD WORK